Phenolic Plate Sets |
|
1115 |
5" Flexible Set (Add "mm" for 14 mm) |
One each of Plate #1005, Pad #9835, Nut #9825 |
$39.70 |
1000F |
7" Flexible Set (Add "mm" for 14 mm) |
One each of Plate #1007F, Pad #1050, Nut #9825 |
$40.65 |
1000 |
7" Standard Set (Add "mm" for 14 mm) |
One each of Plate #1007, Pad #1050, Nut #9825 |
$41.73 |
1000NT |
#49-36-6000 Milwaukee 7" Std. Disc Ass'y No Thrd |
One each of Plate #1007NT, Pad #1050, Nut #9825 |
$41.73 |
1000HD |
7" Heavy Duty Set (Add "mm" for 14 mm) |
One each of Plate #1007HD, Pad #1050, Nut #9825 |
$42.81 |
1010 |
9" Standard Set (Add "mm" for 14 mm) |
One each of Plate #1009, Pad #1050, Nut #9825 |
$43.62 |
1010NT |
#49-36-6050 Milwaukee 9" Std. Disc Ass'y No Thrd |
One each of Plate #1009NT, Pad #1050, Nut #9825 |
$43.62 |
Phenolic Plates with Hubs |
|
|
1005 |
5" Flexible Plate with 5/8"-11 Thread |
10,000 RPM For 60 grit or finer + extreme curves |
$14.90 |
1007F |
7" Flexible Plate with 5/8"-11 Thread |
10,000 RPM For 60 grit or finer + extreme curves |
$15.85 |
1007 |
7" Standard Plate with 5/8" 11 Thread |
10,000 RPM For 50 grit or coarser |
$16.93 |
1007NT |
#48-80-6000 Milwaukee 7" Std Plate No Threads |
10,000 RPM |
$16.93 |
1007HD |
7" Heavy Duty Plate with 5/8"-11 Thread |
10,000 RPM For 50 grit or coarser |
$18.01 |
1009 |
9" Standard Plate with 5/8"-11 Thread |
8,000 RPM For all grits |
$18.82 |
1009NT |
#48-80-6050 Milwaukee 9" Std Plate No Threads |
8,000 RPM |
$18.82 |
Phenolic Plate Rubber Backing Pads |
|
|
1050 |
Rubber Fill Pad (Milwaukee #51-36-3500) |
10,000 RPM with 5/8" x 11 Thread |
$19.20 |
9835 |
Rubber Fill Pad for 5" Set |
7,500 RPM with 5/8" x 11 Thread |
$19.20 |
691709 |
Rubber Fill Pad for 14mm Sets |
12,500 RPM 14mm Center Hole |
$19.20 |
Phenolic Plate Nuts |
|
|
9825 |
5/8"-11 Locking Nut (Milwaukee #49-40-0350) |
5/8"-11 Thread; 1-1/2" Flange x .380" Tall |
$5.60 |
9825SH |
5/8"-11 Locking Nut 1-1/2" Flange w/ Sp. Holes |
5/8"-11 Thread; 1-1/2" Fl. x .380" Tall .219 Sp. Holes |
$6.27 |
9825SSH |
5/8"-11 Short Nut - 1-1/2" Flange w/ Sp. Holes |
5/8"-11 Thread; 1-1/2" Fl. x .315" Tall .219 Sp. Holes |
$6.27 |
9825140SH |
14mm-2 Locking Nut - 1-1/2" Flange |
14mm-2 Thread; 1-1/2" Flange x .38" Tall |
$6.27 |