Backing Pads, Plates, and Accessories for Surface Preparation and Finishing      1-574-936-4757


Phenolic Plate Sets


Phenolic Plate SetsPlymouth Product's Phenolic Plate Sets provide a high quality, economical backing system.

PHENOLIC SET BENEFITS . . .

Each plate has a unique hole pattern allowing air to flow through to the abrasive disc. The moving air cools the disc and work area prolonging the life of the disc. Each set consists of a hubbed phenolic plate, rubber backing pad, and spindle locking nut. For 14mm spindles, indicate by adding "mm" to the part number. Nuts are also available with spanner holes. All plates have a 5/8" x 11" threaded hub but can be used on a 3/8" or 1/2" spindle with a nut. This design provide the ultimate in surface finishing performance, cool operation, and long life.

> > > > > > > > > > > > > > > > >
PART # SIZE / TYPE DESCRIPTION PRICE
PHENOLIC PLATE SETS
1115 5" Flexible Set (Add mm for 14mm) One Each: Plate #1005, Pad #9835, Nut #9825 24.20
1000F 7" Flexible Set (Add mm for 14mm) One Each: Plate #1007F, Pad #1050, Nut #9825 24.80
1000 7" Standard Set (Add mm for 14mm) One Each: Plate #1007, Pad #1050, Nut #9825 25.48
1000HD 7" Heavy Duty Set (Add mm for 14mm) One Each: Plate #1007HD, Pad #1050, Nut #9825 26.17
1010 9" Standard Set (Add mm for 14mm) One Each: Plate #1009, Pad #1050, Nut #9825 26.68
PHENOLIC PLATES WITH HUBS
1005 5" Flexible Plate with 5/8"-11 Thread 10,000 RPM For 60 grit or finer + extreme curves 9.44
1007F 7" Flexible Plate with 5/8"-11 Thread 10,000 RPM For 60 grit or finer + extreme curves 10.04
1007 7" Standard Plate with 5/8"-11 Thread 10,000 RPM For 50 grit or coarser. 10.73
1007HD 7" Heavy Duty Plate with 5/8"-11 Thread 10,000 RPM For 50 grits or coarser. 11.41
1009 9" Standard Plate with 5/8"-11 Thread 10,000 RPM For all grits. 11.93
PHENOLIC PLATE RUBBER BACKING PADS
1050 Rubber Fill Pad 10,000 RPM with 5/8" x 11 Thread 11.61
9835 Rubber Fill Pad for 5" Set 7,500 RPM with 5/8" x 11 Thread 11.61
691709 Rubber Fill Pad for 14mm Set 12,500 RPM 14mm Center Hole 11.61
PHENOLIC PLATE NUTS
9825 5/8"-11 Locking Nut - 1-1/2" Flange 5/8"-11 Thread; 1 1/2" Flange x .380" Tall 3.15
9825SH 5/8"-11 Locking Nut - 1-1/2" Flange w/ Sp. Holes 5/8"-11 Thread; 1 11/2" Fl. x .380" Tall .219 Sp. Holes 3.53
9825S 5/8"-11 Short Nut - 1-1/2" Flange 5/8"-11 Thread; 1 1/2" Flange x .315" Tall 3.53
9825SSH 5/8"-11 Short Nut - 1-1/2" Flange w/ Sp. Holes 5/8"-11 Thread; 1 11/2" Fl. x .315" Tall .219 Sp. Holes 3.85
691707 14mm-2 Locking Nut - 1 1/2" Flange 14mm-2 Thread; 1 1/2" Flange x .565" Tall 3.53
You can order using your account number, Visa or Mastercard at SECURE ORDER.
If you want to set up an account with us please see Information on SETTING UP AN ACCOUNT.


Plymouth Products
1800 Jim Neu Drive
Suite 7
Plymouth, IN  46563

1-574-936-4757

FAX
1-574-936-8044

E-MAIL

FRONT PAGE